1.4.1. Dashboard

Fig. 1.6. Dashboard and governing bodies

On the dashboard the following devices and governing bodies (fig. 1.6) are located.
1 – control unit of external lighting and lighting of devices.
The control unit includes the following.
The switch of 1 external lighting can hold three fixed positions. Rotation of the handle clockwise to the first fixed situation include external lighting, at further turn to the second fixed situation the passing or driving light of headlights depending on position of the switch of the light alarm system is turned on.
Regulator 2 lighting of devices. At the included external lighting by rotation of the regulator change brightness of lighting of devices.
Regulator 3 proofreaders of light of headlights. At the included headlights rotation of the regulator change the direction of a beam of light of headlights. Provisions of the regulator of the proofreader correspond to the following options of loading:
0 – one driver or the driver and the passenger on a front seat;
1 – all places are taken;
2 – all places are taken also freight in a luggage carrier no more than 50 kg;
3 – one driver and freight in a luggage carrier
Switch of 4 back fog fires. When pressing the button of the switch back fog fires join if external lighting is included. By repeated pressing the button back fog fires are switched off.
2 – switch of a sound signal. To include a sound signal, press the left or right button of a steering wheel with the corresponding symbol.
3 – lever of the switch of indexes of turn and light of headlights. The switch include indexes of turn and electric chains of headlights at the included ignition depending on position of the handle of 1 switch of external lighting.
The lever 2 switches can hold the following positions.
In the vertical plane:
By I (average position of the lever) – indexes of turn are switched off. All external lighting is switched off, marker lights are included, the passing or driving light of headlights depending on position of the ignition key and the handle of 1 switch of external lighting is turned on;
II (the lever is translated a little down) – are included indexes of the left turn (unstable situation);
III (the lever is translated a little down) – are included indexes of the left turn (the fixed situation);
IV (the lever is translated a little up) – are included indexes of the right turn (unstable situation);
V \are included (the lever is translated up) indexes of the right turn (the fixed situation).
In the horizontal plane:
VI (on themselves) – turned on driving beam of headlights irrespective of position of the switch of external lighting (unstable situation);
VII (from themselves) – turned on driving beam of headlights if the handle of 1 switch of external lighting is turned towards a symbol of passing beam of headlights (the fixed situation).
4 – combination of devices.
5 – lever of the switch of cleaners and washers of glasses. The switch include electric chains at the included ignition.
The lever of the switch can hold the following positions.
In the vertical plane:
By I (the lower position of the lever) – cleaners and washers of glasses are switched off;
By II (the lever is translated a little up) – the faltering operating mode of screenwash (unstable situation) is included;
By III (the lever is moved above) – the faltering operating mode of screenwash (the fixed situation) is included;
By IV (the lever is moved above) – the first speed of screenwash (the fixed situation) is included;
By V (the lever is moved above) – the second speed of screenwash (the fixed situation) is included.
In the horizontal plane:
By VI (on itself) – the windshield washer (unstable situation) is included;
By VII * (from itself) – back door glass cleaner (the fixed situation) is included;
By VIII * (from itself) – the back door glass washer (unstable situation) is in addition included.

* For cars with a body the hatchback or the station wagon.

At the right and lower end faces of the lever the keys 1 and 2 (see a photo) serving for control of the route computer are established (see. "The route computer").
6 – the switch (lock) of ignition integrated with the anti-theft device is located on the right side of a steering column. The key in the lock can occupy one of three provisions:
0 – it is switched off. The situation fixed a key is taken out. At the taken-out key the locking mechanism of the anti-theft device works. For the guaranteed blocking of a shaft of steering turn a steering wheel to the right or to the left before click. For switching off of the mechanical anti-theft device insert a key into the switch of ignition and, slightly turning a steering wheel to the right-to the left, turn a key in situation "I";
I \ignition. The situation fixed is included ignition, the key is not taken out, steering is unblocked;
II \starter. Situation is unstable, the key is not taken out, steering is unblocked. It is reached by turn of a key clockwise with overcoming effort of a spring. For work of a starter it is necessary to hold a key a hand. The switch of ignition is equipped with blocking of repeated inclusion of a starter at the working engine. For repeated inclusion of a starter after unsuccessful attempt of start-up transfer a key from situation "I" to situation "0", and then again to situation "II".

Preventions
Do not hold a key in situation "II" more than 10 pages.
It is strictly forbidden to switch off ignition and to take out a key from the ignition switch during the movement as it will lead to sharp increase in effort to pedals of a brake and blocking of steering.

Note
If ignition is switched off, and the key is left in the ignition lock, then when opening a door of the driver the buzzer publishes a continuous trill, warning about the key left in the ignition lock.

7 – switch of heating of back glass. When pressing a key of the switch heating of back glass joins, and in a key the control lamp lights up. By repeated pressing heating is switched off.
8 – switch of the alarm system. When pressing a key of the switch all indexes of turn and the control lamp established in a key light up the blinking light. By repeated pressing a key the alarm system is switched-off.
9 – hours. When pressing the button located in the center of the dial time conversion is made.
10 – cover of a ware box. To open it, delay a key of the lock and lower a cover of a ware box. If ignition is included, the lamp of illumination of an internal part of a ware box lights up.
11 – a nest for the radio equipment. Installation of the radio equipment corresponding by the sizes and a way of fastening to the international standards is provided.
12 – office for small things. The plastic cover with the inscription "OPEN" is supplied in the top part with two clamps preventing spontaneous opening of a cover. In office the special rubber rug is provided.
13 – control unit of system of heating and ventilation of salon. Methods of management of heating and ventilation of salon are described below (see. "Heating and ventilation of salon", page 20).
14 – forward ashtray. To use an ashtray, pull on yourself a cover, having undertaken its top ledge.
For cleaning of an ashtray take out it from a nest, having pulled on themselves.
15 – lighter. For use of the lighter press the button of its mobile part.
After heating filched approximately during 10–20 with a mobile part automatically with click will return to a starting position, and the lighter can be taken for use.

Preventions
The lighter can be turned on repeatedly not earlier than through 20 pages.
Do not hold forcibly the lighter in the pressed situation.
Do not use a cartridge of the lighter for connection of powerful electric devices (the electrocoffee maker, etc.) – it can lead to damage of electric equipment of the car.
If the button of the lighter does not come back to a starting position through 30 from later inclusion, take the lighter from the boss not to allow burn-out of a spiral.

16 – lever of the parking brake. To slow down the car the parking brake, lift the lever against the stop up. At the same time in a combination of devices the control lamp will light up red light and brakes of back wheels will be blocked. To rastormozit the car, pull the lever a little up, press the button at an end face of the handle of the lever and lower the lever against the stop down — the control lamp has to go out.
17 – gear shifting lever. The scheme of gear shifting is applied on the handle of the lever.
18 – accelerator pedal.
19 – brake pedal.
20 – coupling pedal.
21 – cover of the assembly block of safety locks and relay. Replacement of safety locks and the relay is described in section 10 "Electric equipment" (see. "Replacement of safety locks and relay in the assembly block").
22 – cowl lock drive lever. Turn of the lever on themselves unlock the cowl lock.