10.11.1. Removal and installation of a washer reservoir

You will need a key "on 10".
1. Remove the rechargeable battery (see. "Removal and installation of the rechargeable battery").
2. Disconnect blocks with wires from the washer pump. Pay attention that the block with a pink-blue wire is connected to a conclusion "plus" the electric motor, and to a conclusion "minus" – a block with a black wire.
3. Turn off two nuts of fastening of a tank.
4. Raise a tank, having removed it from a hairpin. Disconnect a hose from the pump union, having closed an opening a finger if in a tank there is a liquid.
5. Merge liquid from a tank in pure capacity.
6. Wash out the polluted grid of a glass and install a tank as it should be, the return to removal.