10.13.3. Removal and installation of the electric motor of the fan of system of heating and ventilation of salon
You will need screw-drivers with a flat and crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a heater (see. "Removal and installation of a radiator of a heater").
3. Remove a hose of ventilation of brush knot of the electric motor of the fan.
|
4. Turn out three screws of fastening …
|
5. … also take the fan electric motor from its case.
Notes
So the fan electric motor assembled with a krylchatka looks.
At malfunction of the electric motor or a krylchatka all knot assembled as the attempt to remove a krylchatka from an electric motor shaft will lead to her breakage is subject to replacement.
It is impossible to conduct independently and balancing of a krylchatka. It balance assembled with the electric motor industrially at specialized diagnostic stands by means of installation on the blade of the fan of balanced brackets.
|
6. Install the fan electric motor as it should be, the return to removal.