10.13.4. Replacement of the additional resistor of a heater

You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove the right overlay of a frame of a windshield (see. "Removal and installation of overlays of a frame of a windshield").
3. Disconnect a block with wires from resistor conclusions.
4. Turn out the fastening screw …
5. … also remove the additional resistor of a heater. For descriptive reasons work is shown on the removed heater.
6. Install the resistor as it should be, the return to removal.