10.13.5. Replacement of a motor-reducer and sensor of position of the gate of a heater

The motor-reducer of the gate of a heater and the sensor of its situation are executed in the uniform block.
You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a heater (see. "Removal and installation of a radiator of a heater").
3. Turn out three screws of fastening of the block of a motor-reducer to the heater case …
4. … also remove the block and the sensor of position of the gate of a heater.
5. Establish details as it should be, the return to removal.