10.13.7. Replacement of the switch of operating modes of the electric fan of a heater

You will need the screw-driver with a direct edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an overlay of the console (see. "Dismantling and assembly of the dashboard").
3. Turn out four screws of fastening of the switch of operating modes of the electric fan of a heater to an overlay of the console …
4. … also remove the switch.

Notes
So the switch of operating modes of the electric fan removed from the car assembled looks.
Replace the failed switch new, paying attention to its marking from a reverse side.

5. Install the switch of operating modes of the electric fan of a heater as it should be, the return to removal.