You will need screw-drivers with a crosswise and flat edge.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Lower a steering column down to an emphasis, remove a steering wheel (see. "Removal and installation of a steering wheel") …

3. … and a cover of the block of safety locks and the relay (see. "Replacement of safety locks and relay in the assembly block").

4. Turn out four screws of fastening of a guard of the dashboard …	5. … also remove a guard from the dashboard (for descriptive reasons works are performed with partial dismantling of a steering column).

6. Turn out two screws of fastening of a combination of devices to the dashboard …	7. … also take it from a nest.

8. Hook and turn a clamp of a block of a plait of wires of the dashboard …	9. … and, having disconnected a block from conclusions of a combination of devices, remove a combination of devices from the car.

Note So the combination of devices removed from the car looks.

10. Establish a combination of devices as it should be, the return to removal.

Prevention At connection of a plait of wires to conclusions of a combination of devices be careful — do not damage contact conclusions.