10.21.1. Replacement of the sensor of an alarm lamp of emergency pressure drop of oil

The sensor of an alarm lamp of emergency pressure drop of oil is screwed in the oil canal on the right side of the block of cylinders under a final collector.
You will need a key "on 21".

Good advice
Observing security measures, you make replacement of the sensor on the cold engine or not to burn a hand, use gloves made of cloth and clothes with long sleeves.

1. Disconnect a wire from the minus plug of the rechargeable battery.
2. For convenience of work remove the air filter (see. "Removal and installation of the air filter").
3. Squeeze a block …
4. … also disconnect it with a wire from a sensor conclusion.
5. Weaken a sensor inhaling …
6. … also turn out it from the oil channel.

Note
So the sensor of an alarm lamp of emergency pressure drop of oil looks. Pay attention to the marking applied on the sensor case to buy the sensor with the same parameters.

7. Install the new sensor as it should be, the return to removal.