10.3.3. Removal and installation of the assembly block

You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Uncover the assembly block (see. "Replacement of safety locks and relay in the assembly block").
3. Turn out the screw of fastening of the assembly block to the dashboard...
4.... also remove the assembly block from the dashboard, bringing it out of gearing with fastening hooks.
5. Remove all relays and safety locks from the assembly block (see. "Replacement of safety locks and relay in the assembly block").

Color of the case of a safety lock and its compliance to face value

6. Wring out clamps of plugs of an electrical wiring...
7.... take plugs with wires from the assembly block and remove the assembly block from the car.

Good advice
Mark the wires removed from the assembly block to install them in the new assembly block on former places.

Note
The assembly block is delivered in spare parts together with a plait of wires of the dashboard.

8. Install the assembly block as it should be, the return to removal.