10.3.4. Replacement of additional safety locks and relay of system of injection of fuel
It will be required to you: a key "on 8", the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
Arrangement of additional safety locks and relay of system of injection: F1 (15 A) – a safety lock of a chain of the main relay and blocking of a starter; F2 (7,5 A) – a safety lock of a power-supply circuit of EBU (controller) of F3 (15 A) – an electrogasoline pump safety lock; K1 – the main relay; K2 – the relay of inclusion of an electrogasoline pump
2. Remove the right side facing of a tunnel of a floor (see. "Removal and installation of facings of a tunnel of a floor").
3. Disconnect a block with wires from EBU, see. "An electronic control unit the engine (controller)"), also take her aside.
4. By means of tweezers take a faulty safety lock and replace it new.
|
5. For replacement of the faulty relay turn off the corresponding nut of its fastening...
|