10.4.3. Removal and installation of the generator

You will need a face key "on 13".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Take off a generator drive belt (see. "Replacement of a belt of the drive of the generator").
3. Disconnect a block with a wire from a conclusion of "D+" of the generator.
4. Take away a rubber cover, turn off a nut...
5.... also disconnect wires from a contact hairpin.
6. Turn off a nut of a bolt of the lower fastening of the generator to an arm...
7.... remove a nut together with the remote plug...
8.... also take out a bolt of the lower fastening of the generator.
9. Finally turn off a nut of fastening of the generator to the top arm...
10.... having completely turned out an adjusting bolt 1, remove a tension level 2...
11.... also remove the generator from the car.
12. Install the generator as it should be, the return to removal.
13. Adjust a belt tension (see. "Check of a tension of a belt of the drive of the generator", page 50). Tighten a nut of fastening of a tension level of the generator the moment of 20 N · m (2 kgfs · м).