10.9.10. Replacement of the control unit of external lighting and lighting of devices

You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Uncover the block of safety locks and the relay (see. "Replacement of safety locks and relay in the assembly block").
3. Turn out the screw of fastening of the control unit of external lighting and lighting of devices to the dashboard …
4. … also nominate the control unit to yourself.
5. Squeeze clamps of a block of a plait of wires from two parties …
6. … also disconnect the control unit from a dashboard plait.

Note
The control unit of external lighting and lighting of devices of a non-demountable design therefore at failure of separate details it is subject to replacement.

7. Install the control unit of external lighting and lighting of devices as it should be, the return to removal.