10.9.3. Replacement of lamps
Note
Apply the lamps specified in the appendix 6 to the correct work of lighting and the light alarm system.
|
Prevention
Before replacement of lamps in devices of lighting of the car disconnect a wire from the minus plug of the rechargeable battery.
|
For replacement of a lamp of driving beam of headlights execute the following operations.
1. Remove a rubber cover of a lamp of driving beam of headlights …
|
2. … disconnect a block with wires from lamp conclusions …
|
Prevention
Do not touch by lamp flask fingers as the galogenovy lamp strongly heats up, fatty spots will cause darkening of a flask and, as a result, decrease in a light stream. Take a lamp for a flask only in pure gloves or a pure rag. If on a lamp after all there were fatty spots, remove them with alcohol.
|
5. Establish a lamp as it should be, the return to removal.
For replacement of a lamp of passing beam of headlights execute the following operations.
1. Remove a rubber cover of a lamp of passing beam of headlights …
|
2. … disconnect a block with wires from lamp conclusions …
|
5. Establish a lamp as it should be, the return to removal.
For replacement of a lamp of dimensional light in a headlight execute the following operations.
1. Remove a rubber cover of a lamp of passing beam of headlights (see above) …
4. Establish a lamp as it should be, the return to removal.
For replacement of a lamp of the forward index of turn execute the following operations.
3. Turn counterclockwise a cartridge of a lamp of the forward index of turn …
|
4. … also take it from a block headlight.
|
5. Turn a lamp in the boss counterclockwise and take out it from the boss.
6. Establish a lamp as it should be, the return to removal.
For replacement of a lamp in the side index of turn execute the following operations.
1. Remove a side lamp of indexes of turn from the car (see. "Replacement of a side lamp of indexes of turn") …
For replacement of any lamp in a back lamp execute the following operations.
Note
Lamps of dimensional and fog light are united in one lamp, dvukhnitevy.
|
1. Remove a lamp from the car (see. "Replacement of a back lamp").
2. Turn a cartridge of a lamp of dimensional and fog light counterclockwise and take out it from a lamp.
|
3. Turn counterclockwise a lamp in the boss and take it.
|
4. Establish a new lamp as it should be, the return to removal.
5. Replace other lamps of a back lamp similarly.
Replace a lamp in a lamp of illumination of registration plate in the following order.
3. Establish a lamp as it should be, the return to removal.
4. Replace the second lamp similar to replacement of the first, previously having removed facing of the lock of a trunk lid (see. "Removal and installation of the lock of a trunk lid and its drive").
For replacement of the lighting lamp of a luggage carrier execute the following operations.
1. Hook a lamp in the place shown by an arrow and take it from an aperture.
|
2. Wring out spring contact and take a lamp.
|
3. Establish a lamp as it should be, the return to removal.
For replacement of the lighting lamp of salon execute the following operations.
1. Hook a plafond …
|
2. … and, overcoming resistance of clamps, remove a plafond of illumination of salon.
|
3. Wring out spring contact and take a lamp.
4. Establish a lamp as it should be, the return to removal.