10.9.4. Replacement of a block headlight

It will be required to you: a key "on 10", the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a front bumper (see. "Removal and installation of a front bumper").
3. Wring out a clamp and disconnect a block of a plait of wires from a block headlight.
4. Turn out a forward lower bolt …
5. … and side screw of fastening of a headlight.
6. Turn out four screws of fastening of a casing of a headlight …
7. … also remove a casing.
8. Turn out a bolt of the top fastening of a block headlight …
9. … also remove a block headlight from the car.
10. Establish a block headlight as it should be, the return to removal.