You will need the screw-driver with a crosswise edge.

1. Disconnect a wire from the minus plug of the rechargeable battery.

2. Separate a block of a back plait of wires and wires of an additional stoplight, and then push a plait of wires in an opening of the shelf of a luggage carrier.	3. Turn out two screws of fastening of facing of an additional stoplight …

4. … also remove facing assembled with a stoplight.	5. Turn out two screws of fastening of an additional stoplight to its facing …

6. … also remove an additional stoplight.

Note The additional stoplight is executed assembled with light-emitting diodes therefore at their burn-out it is subject to replacement. Pay attention to marking of an additional stoplight to get just the same.

7. Establish an additional stoplight as it should be, the return to removal.