11.10.3. Adjustment of position of the lock of a trunk lid

If the trunk lid has a vertical side play in a closed position or is closed with big effort, adjust position of the lock on height.
It will be required to you: a face key (head) "on 10", the screw-driver with a flat edge, passatizh.
1. Weaken a draft fastening screw inhaling.
2. If the end of draft is bent, straighten it.
3. Weaken an inhaling of three nuts of fastening of the lock, previously having removed its facing.
4. Move the lock in the necessary direction and tighten the draft fastening screw. Check ease of locking of the lock. If necessary repeat adjustment. After that finally tighten nuts of fastening of the lock.
5. If when closing a trunk lid the clamp does not get to a lock latch (the blow is heard, and the cover is closed with big effort), weaken an inhaling of two bolts of fastening and displace a clamp in the necessary direction. Check ease of locking of the lock. If necessary repeat adjustment. After that tighten finally bolts of fastening of a clamp.