11.11.12. Replacement of a window regulator of a back door

It will be required to you: keys "on 8", "on 10", wooden or plastic wedges.
1. Remove an upholstery of a back door (see. "Removal and installation of an upholstery of a back door").
2. Lift glass so that to get access to bolts of fastening of a holder of glass through the top opening of a door. Turn out two bolts of fastening of a holder of glass to the window regulator ram.
3. Lift glass hands up to an emphasis and record it wooden or plastic wedges.
4. A key "on 8" turn off three nuts of fastening of a reducer, and a key "on 10" – two nuts of fastening of a guide of a window regulator.
5. Take out a window regulator from a door through a technological window.

Note
So the mechanism of a window regulator of a back door removed from the car looks.

6. Establish a window regulator as it should be, the return to removal. After installation check that glass was closed densely, without distortion. If it not so, weaken screws of fastening of a holder of glass to the ram and expose it at the expense of oval openings in the ram in the necessary situation.