11.11.13. Removal and installation of a back door

It will be required to you: face keys (head) "on 8", "on 10".

Good advice
Door quite heavy and bulky therefore we recommend to remove and establish it with the assistant.

When replacing a door remove all fittings from an old door and rearrange it on a new door.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an upholstery of a back door (see. "Removal and installation of an upholstery of a back door").
3. Squeeze a block clamp …
4. … also separate a block of a plait of wires of a motor-reducer of blocking of the lock of a door.
5. Take out collars of fastening of a plait of wires from openings of the internal panel of a door.
6. Take out a protective tube of a plait of wires …
7. … also extend a plait of wires through an opening in a forward part of a door.
8. A face key "on 10" turn out two bolts of fastening of the limiter of opening of a door to an average rack of a body.
9. A face key "on 13" turn out bolts of fastening of top …
10 … and the lower doors of loops to an average rack of a body, then remove a door.
11. Establish a door upside-down. Before a final inhaling of bolts of fastening of loops to a rack of a body close a door and expose it so that gaps in apertures on all perimeter were identical. Then accurately open a door and finally tighten bolts of fastening of loops. Check ease of opening and reliability of closing of the lock of a door and if necessary adjust the lock (see. "Adjustment of the lock of a forward door").