11.11.6. Replacement of a window regulator of a forward door

It will be required to you: a key "on 10", wooden or plastic wedges.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an upholstery of a forward door (see. "Removal and installation of an upholstery of a forward door").
3. Lower or lift glass so that to get access to bolts of fastening of a holder of glass through the top opening of a door. Turn out two bolts of fastening of a holder of glass to the window regulator ram.
4. Lift glass hands up to an emphasis and record it wooden or plastic wedges.
5. Separate a block of a plait of wires of a window regulator.
6. Turn off three nuts of fastening of a motor-reducer of a window regulator.
7. Turn off four nuts of fastening of a guide of the mechanism of a window regulator …
8. … also take out a window regulator from a door through a technological window.

Notes
So the mechanism of a window regulator of a forward door removed from the car looks.
Pay attention to marking of a window regulator to get for replacement just the same.

9. Establish a window regulator as it should be, the return to removal. After installation check that glass was closed densely, without distortion. If it not so, weaken screws of fastening of a holder of glass to the ram and expose it at the expense of oval openings in the ram in the necessary situation.