11.11.7. Removal and installation of a forward door

It will be required to you: face keys (heads) "on 10", "on 13".

Good advice
Door quite heavy and bulky therefore we recommend to remove and establish it with the assistant.

When replacing a door remove all fittings from an old door and rearrange it on a new door.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an upholstery of a forward door (see. "Removal and installation of an upholstery of a forward door").
3. Separate a block of a plait of wires of a window regulator.
4. Separate a block of a plait of wires of a motor-reducer of blocking of the lock of a door.
5. Take out collars of fastening of a plait of wires from openings of the internal panel.
6. Extend a plait of wires through an opening in a forward part of a door.
7. A face key "on 10" turn out two bolts of fastening of the limiter of opening of a door to a body rack.
8. A face key "on 13" turn out bolts of fastening of the top and lower loops of a door to a forward rack of a body and remove a door.
9. Establish a door upside-down. Before a final inhaling of bolts of fastening of loops to a rack of a body close a door and expose it so that gaps in apertures on all perimeter were identical. Then accurately open a door and finally tighten bolts of fastening of loops. Check ease of opening and reliability of closing of the lock of a door, if necessary adjust the lock (see. "Adjustment of the lock of a forward door").