11.11.8. Removal and installation of an upholstery of a back door

You will need screw-drivers with a flat and crosswise edge.
1. Wring out from the socket the thin screw-driver a window regulator handle clamp.
2. Shift a clamp so that the ledge on it left gearing with the socket, and remove it.
3. Remove the handle of a window regulator and the socket.
4. Turn out the screw of fastening of facing of the internal handle of a door.
5. Hook the screw-driver facing of the internal handle of a door …
6. … also remove facing.
7. Turn out two screws of fastening of the internal handle of a door.
8. Hook the screw-driver the handle …
9. … also remove it.
10. Turn out the button of blocking of the lock of a door.
11. By means of the screw-driver wring out a door upholstery so that plastic holders left openings at doors, and remove an upholstery.

Useful tips
Insert the screw-driver as it is possible closer to holders, otherwise it is possible to damage an upholstery.
Not to scratch paint, wrap up a screw-driver sting an insulating tape.

Note
The upholstery of a back door (view from a reverse side) fastens to the door panel ten plastic holders. The damaged holders replace new.

12. Turn out two screws of fastening of an arm of the internal handle of a door …
13. … also remove an arm.
14. Remove the expansion plug of an axis of the mechanism of a window regulator.
15. Establish the removed details as it should be, the return to removal.