11.11.9. Removal and installation of the lock of a back door

Fig. 11.3. Lock, drafts of the drive and handle of a back door: 1 – draft of the external handle; 2 – external handle; 3 – intermediate draft of blocking of the lock; 4 – intermediate lever of blocking of the lock; 5 – draft of the button of blocking of the lock; 6 – internal handle; 7 – draft of the internal handle; 8 – internal lock; 9 – external lock; 10 – overlay of the external lock

The lock, drafts of the drive and the handle of a back door are shown in fig. 11.3.
It will be required to you: a key "on 8", screw-drivers with a flat and crosswise edge, passatizh.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an upholstery of a back door (see. "Removal and installation of an upholstery of a back door").
3. Squeeze a block clamp …
4. … also separate a block of a plait of wires of a motor-reducer of blocking of the lock of a door.
5. Turn out three screws of fastening of the internal handle of a door.
6. Take away the handle from the internal panel of a door.
7. Squeeze a clamp of a tip of draft of the drive …
8. … also disconnect a draft tip from the internal handle of the lock.
9. Having hooked the screw-driver, disconnect from a door the holder of intermediate draft of blocking of the lock.
10. Turn out the screw of fastening of the intermediate lever of blocking of the lock.
11. Lower the intermediate lever down and bring draft of the button of blocking of the lock out of an arm opening.
12. Turn out a bolt of fastening of a guide of glass …
13. … also take out a guide from a door.
14. Hook the screw-driver a tip of draft of the external handle and disconnect draft from the lock lever.
15. Remove an overlay of the external lock of a door.
16. Turn out two screws of fastening of the external lock …
17. … also remove the lock.
18. Turn out the screw of fastening of the internal lock...
19. … also remove the internal lock with drafts of blocking and the internal handle.
20. Put the lock as it should be, the return to removal, having greased previously all rubbing details with jellied lubricant. Check ease of opening and reliability of closing of the lock of a door. If necessary adjust the lock similar to adjustment of the lock of a forward door (see. "Adjustment of the lock of a forward door").