11.12.1. Removal and installation of a front seat

It will be required to you: face keys (heads) "on 13", TORX E10, the screw-driver.
1. Shift a seat against the stop forward, by means of the screw-driver bring the ends of torsions out of arms and remove both torsions.
2. Shift a seat against the stop back and turn off a key "on 13" two nuts of fastening of arms.
3. Remove both arms from hairpins.
4. A key of TORX E10 turn out two bolts of forward fastening of a sled to a floor.
5. Shift a seat against the stop forward and a key of TORX E10 turn out three bolts of back fastening of a sled.
6. Take out a seat from salon.
7. Establish seats as it should be, the return to removal. At the same time keep in mind that the top ends of torsions (1 – the right torsion, 2 – the left torsion) are bent specularly.
8. It is more convenient to install torsions as follows: shift a seat back, insert at first the lower end right 1, and then the lower end the left 2 torsions into openings of arms and, having shifted a seat forward, get the top ends of torsions for hooks on a seat basis rack.