11.15.6. Removal and installation of facings of the central racks of a body

It will be required to you: a key "on 17", screw-drivers with a flat and crosswise edge.
1. Having hooked the screw-driver, remove the top decorative slip.
2. Turn out a bolt of the top fastening of a belt …
3. … also remove the top loop of a seat belt.
4. Having hooked the screw-driver …
5. … remove a cap from a bolt of the lower fastening of a belt.
6. Turn out a bolt of the lower fastening of a belt.
7. Remove facings of thresholds (see. "Removal and installation of facings of thresholds").
8. Slightly wring out the lower facing from a rack and bring her out of gearing with a body rack.
9. Turn out the screw of fastening of the top facing of a rack of a body …
10. … also remove the top facing, having brought it out of gearing with a body rack.
11. Establish facings as it should be, the return to removal.