11.17.3. Removal and installation of a radiator of a heater

If from a heater cooling liquid leaks, so the radiator is untight and it needs to be replaced.
You will need the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove a heater (see. "Removal and installation of a heater").
3. Turn out three screws of fastening of a radiator …
4. … also take a radiator from the heater case.
5. If the radiator is strongly polluted, clear it a hair brush and blow compressed air. Replace the leaking radiator.
6. Establish a radiator as it should be, the return to removal.