11.3. Removal and installation of overlays of a frame of a windshield

It will be required to you: screw-drivers with a flat and crosswise edge, a key "on 10".
1. Remove levers of a forward screen wiper (see. "Removal, dismantling and installation of screenwash").
2. Disconnect a tube of nozzles of a washer of a windshield from the washer pump (see. "Removal and installation of a washer reservoir").
3. For removal of overlays of a frame it will be required to turn out seven screws of fastening to them a noise-insulating upholstery and six screws of fastening of slips to a body.
4. Remove a cowl sealant.
5. Turn out the screw which is pulling together the left and right slips.
6. Hook the screw-driver …
7. … also take caps of screws of fastening of slips to a body.
8. Turn out screws of fastening of slips to a body.
9. Turn out screws of fastening of a noise-insulating upholstery to overlays of a frame …
10. … also remove left …
11. … and right slips.
12. Establish the removed details in the sequence, the return to removal.