11.4. Removal and installation of a noise-insulating upholstery of a motor compartment

It will be required to you: screw-drivers with a flat and crosswise edge, a face key (head) "on 10", bokoreza.
1. Remove an overlay of a frame of a windshield (see. "Removal and installation of overlays of a frame of a windshield").
2. Turn out the screw of fastening of the left part of an upholstery to the right part.
3. Weaken an inhaling of a collar and remove a steam discharge hose of a radiator of a heater from the union of a broad tank.
4. Take out a steam discharge hose from an opening of the left part of an upholstery.
5. Raise a broad tank and take away it from an upholstery.
6. Remove the left part of a noise-insulating upholstery.
7. Remove a fixing collar of a vacuum hose from an arm on the right part of a noise-insulating upholstery.
8. Have a bite a coupling collar.
9. Turn off a nut of the lower fastening of an upholstery …
10. … and a nut of the top fastening of a heat-shielding guard of a steering rack, and then take away a guard from a body.
11. Remove the right part of a noise-insulating upholstery.
12. Establish the removed details as it should be, the return to removal.