11.5.1. Removal and installation of a front bumper

It will be required to you: a face key (head) "on 10", the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove an engine mudguard (see. "Removal and installation of a mudguard of the engine").
3. Turn out from below three screws of fastening of a bumper to the left and right protection covers of wings.
4. Turn out four screws of fastening of a bumper to the top cross-piece of a front of a body and two screws of fastening of the right and left casings of headlights to a bumper.
5. Turn out from arches of wheels two screws of fastening of a bumper to forward wings and on one screw of fastening to the left and right protection covers of wings at the left and on the right.
6. Remove a bumper, having pushed it forward.
7. Turn out three bolts of fastening of a beam of a bumper to the lower cross-piece of a body …
8. … also remove a beam.
9. Establish the removed details as it should be, the return to removal. At installation of a bumper get its side edges for edges of casings of wings.