11.5.2. Removal and installation of a rear bumper

It will be required to you: a key "on 10", the screw-driver with a crosswise edge.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Turn off two nuts of the lower fastening of a bumper.
3. Turn out on both sides on one bolt of the top fastening of a bumper.
4. Turn out on both sides two screws of fastening of a bumper to wings and on one screw of fastening of mudguards to a bumper.
5. Remove a bumper, having put forward it back.
6. Establish a rear bumper as it should be, the return to removal. At installation of a bumper get its side edges for edges of wings.