11.6. Removal and installation of the flap and protection cover of a wing
For protection against dirt in niches of forward wheels of the car flaps are installed.
Good advice
Replace the flaps which are not closing all niche of a wheel with those which will protect completely a niche from dirt.
|
It will be required to you: keys "on 7", "on 10", TORX T30 key, the screw-driver with a crosswise edge.
1. Remove the corresponding wheel.
2. A key of TORX T30 turn out two bolts, and the screw-driver — one screw of fastening of an antisplash guard of the engine …
|
3. … also remove a guard.
|
4. A key "on 7" turn out the screw of fastening of a fairing of a forward wing to a threshold.
|
5. A key "on 7" turn out on one screw of fastening of a fairing of a forward wing to the flap and a wing, and a key "on 10" turn off two nuts of its fastening to a body …
|
6. … also remove a fairing.
|
7. A key "on 10" turn off a nut, and the screw-driver turn out the screw of fastening of the flap …
|
8. … also remove the flap.
|
9. Turn out three screws of fastening of the protection cover of a wing to a bumper.
|
10. Turn off a nut of fastening of a casing to an arm of a body and the fastening screw to a bumper …
|
11. … also remove the protection cover of a wing.
|
12. Establish the removed details as it should be, the return to removal.
Note
At installation of the removed details check existence of all spring nuts on a wing casing …
… and on the flap.
|