4.2.3. Check of a tension of a belt of the drive of the generator

According to the recommendation of manufacturer to control a tension of a belt of the drive of the generator follows through each 15 thousand km.
1. Check a generator drive belt tension pressing of a finger it between pulleys of the generator and a bent shaft. When pressing with effort of 100 N (10 kgfs) the deflection of a belt has to make 8–12 mm.

Good advice
For check of a tension it is possible to use scales steelyards, delaying a hook a belt branch.

2. For adjustment of a tension of a belt weaken an inhaling of a nut of fastening of the generator to a tension arm.
3. Adjust a belt tension an adjusting bolt.
4. Tighten a nut of fastening of the generator to a tension level the moment of 21 N · m.