4.3.1. Check of level and a dolivka of oil in the engine lubrication system

It will be required to you: engine oil, pure rag.

The type of the used engine oil is given in the appendix 2.

Before check of level of oil after a trip kill the engine and wait 3–5 min. until oil merges in the pallet.
Add oil of the same brand, viscosity and a class of quality, as at used earlier.
Oil level in a case of the engine should not exceed the top tag on the index (probe), otherwise leaks through laying and epiploons are possible that will cause the raised oil consumption.
Check oil level on the car installed on the flat horizontal platform.

The stopper of an oil-filling mouth is located on a forward left part of a cover of a head of the block of cylinders. The index of level of oil (probe) is located in a forward central part of the engine.
1. Take out the index (probe) …
2. … wipe it with a pure rag and again insert into place.
3. Repeatedly take out the probe. Level of an oil film has to be between the top and lower tags. If the level of oil borders on the lower tag or below it, add oil.
4. For a dolivka of oil turn out a stopper of an oil-filling mouth.
5. Fill in oil in the engine, controlling oil level by means of the index. Before taking out the index, wait 3–5 min. to allow oil to flow down in a case.
6. After the level of oil reaches demanded, wrap a mouth stopper.