4.3.2. Check of level and dolivka of cooling liquid

It will be required to you: cooling liquid, pure rag.

The brand of cooling liquid recommended by manufacturer of the car is specified in the appendix 2. Specify at the dealer — the seller of the car brand of the liquid which is filled in in your car.
Do not mix liquid of different color and different producers. If you do not know brand of the filled-in liquid, and liquid needs to be added, replace all liquid in the cooling system.
Apply production only of the checked manufacturers. Remember that use of low-quality cooling liquid leads to expensive repair of the engine!
Before work install the car on a plain horizontal surface.

Check the level of cooling liquid only on the cold engine. Cooling liquid is toxic therefore observe precautionary measures during the work with it.
Do not pour liquid in a tank above a tag of "MAX" as during the operation of the engine its volume will increase.
At launch of the engine the stopper of a broad tank has to be closed.

Useful tips
Constantly you watch the level of cooling liquid. Its sharp decrease or increase has to become a signal for immediate check of the cooling system of the engine.
If svezhezality antifreeze suddenly unexpectedly quickly changed color on reddish-brown, so sold you a fake to which "forgot" to add corrosion inhibitors. As soon as possible replace liquid until it managed to corrode aluminum details of the cooling system

The broad tank is located in the left part of podkapotny space in a niche of facing of a motor compartment.
1. Level of cooling liquid has to be between the tags of "MIN" and "MAX" applied on a wall of a broad tank. If level is much below …
2. … turn off a stopper of a broad tank …
3. … also add cooling liquid to the required level.
4. Wrap a stopper of a broad tank.

Close a stopper of a broad tank densely. At the working engine the broad tank is under pressure therefore from under leaky wrapped up stopper cooling liquid can begin to flow.