4.5.1. Replacement of a belt of the drive of the generator

The manufacturer recommends to replace a belt each 60 thousand km of a run or times in 2 years depending on what will come earlier. At an insufficient tension of a belt of the drive of the generator the level of a charge of the rechargeable battery decreases.
It will be required to you: keys "on 10", "on 13".
1. For replacement of a belt with a key "on 13" weaken an inhaling of a nut of fastening of the generator to a tension arm.
2. Turning out a key "on 10" an adjusting bolt, move the generator towards the engine against the stop.

Note
It is more convenient to replace a generator drive belt on the car installed on the elevator or an osmotrovy ditch.

3. Install the car on the elevator and remove the right forward wheel (see. "Replacement of a wheel").
4. Remove the flap of the right forward wheel (see. "Removal and installation of the flap").
5. Take off a belt from pulleys of the generator and a bent shaft.
6. Establish a belt as it should be, the return to removal.
7. Adjust a generator drive belt tension (see. "Check of a tension of a belt of the drive of the generator").