4.5.13. Check and adjustment of a cable of the drive of a butterfly valve

You will need passatizh with narrow sponges.
1. Open a cowl and remove a decorative casing of the engine (see. "Removal and installation of a decorative casing of the engine").
2. For visual control of movement of a butterfly valve weaken a collar of fastening and disconnect the airbringing sleeve from a branch pipe of throttle knot (see. "Cleaning of system of ventilation of a case").
3. At completely pressed accelerator pedal (the assistant carries out) check the provision of a butterfly valve — it has to be completely open.
4. At the released accelerator pedal the butterfly valve has to be completely closed. Otherwise the drive needs to be adjusted.
5. Remove a spring stopper …
6. … and, moving a cover of 1 cable, adjust a free wheeling of a cable. After adjustment establish a stopper closely to the rubber plug 2.

Note
If the cable is adjusted correctly, the deflection of its branch between a tip of a cover and the sector of throttle knot from effort of a hand has to be no more than 3 mm.