5.11.1. Replacement of laying of a cover of a head of the block of cylinders

In the VAZ-21126 engine the joint between a cover and a head of the block of cylinders is condensed with the sealant applied on privalochny surfaces of details.
If the oil leak from under a cover of a head of the block of cylinders did not manage to be eliminated with tightening of nuts of fastening of a cover, replace a sealing layer of sealant.
It will be required to you: a face key "on 8", keys "on 10", "on 13", screw-drivers with a flat and crosswise edge, nippers or a knife.
1. Separate blocks of a plait of wires of coils of ignition …
2. … and plait of wires of nozzles.
3. Having squeezed latch fingers, disconnect a block of a plait of wires of coils of ignition...
4. … and a block of a plait of wires of nozzles from a forward arm.
5. Turn off a key "on 10" bolts of fastening and remove forward...
6.... and back arms.
7. Weaken a collar inhaling …
8. … also remove an exhaust hose of system of ventilation of a case from a block head cover branch pipe.
9. Weaken a collar inhaling …
10. … also remove an exhaust hose of system of ventilation of a case from a branch pipe of the block of cylinders.
11. Turn out the screw of fastening of an arm of a guide of the index of level of oil (probe) …
12. … also remove a guide together with the index.
13. Turn off a key "on 10" two nuts of fastening of an inlet collector to a block head cover.
14. A key "on 13" turn off three nuts and turn out two bolts of fastening of an inlet collector to a block head …
15. … also remove an inlet collector.
16. Turn out a face key "on 8" fifteen bolts of fastening of a cover of a head of the block of cylinders...
17.... wring out a cover from a head of the block of cylinders for the ledges located on its perimeter...
18.... also uncover.

Note
Before installation of a cover clear privalochny surfaces of a head of the block and a cover of old sealant, degrease them. Apply a thin film of sealant on a privalochny surface of a head of the block of cylinders.

19. Establish details in the return sequence.