5.11.7. Replacement of laying of an oil case

If leak of oil through laying of an oil case does not manage to be eliminated with tightening of bolts of its fastening, so laying is strongly deformed and it needs to be replaced.
Perform work on an osmotrovy ditch, a platform or whenever possible on the elevator.
It will be required to you: a key "on 10", a face head "on 10".
1. Remove an engine mudguard (see. "Removal and installation of a mudguard of the engine").
2. Merge oil from the engine (see. "Replacement of oil in the engine and an oil filter").
3. Turn out a key "on 10" bolts of fastening of a forward cover of a case of coupling …
4. … also uncover.
5. Turn out a face head "on 10" sixteen bolts of fastening of an oil case.
6. Remove a case, having carefully separated it the screw-driver from the block of cylinders.
7. Remove laying of a case from the privalochny surface of the block of cylinders.
8. Remove the remains of old laying and sealant (at its existence) from the privalochny surfaces of the block of cylinders and an oil case. Carefully wipe rags oil from privalochny surfaces.
9. Lay new laying on a privalochny surface of an oil case.

Good advice
To record laying on a case, apply a layer of sealant on its privalochny surface and paste to it laying. Besides fixing, sealant will provide the best tightness of connection. With the same purpose we recommend to apply sealant and on the privalochny surface of the block of cylinders.

10. Establish a case as it should be, the return to removal, and evenly cross-wise tighten bolts the moment specified in the appendix 1.
11. Fill in oil in an engine case.