5.17.3. Replacement of a broad tank

You will need the screw-driver with a crosswise edge.
1. Remove a stopper from a broad tank. Turn off a stopper of a drain opening in the bottom of the right tank of a radiator and merge from it liquid (see. "Replacement of cooling liquid"). Wrap a stopper of a drain opening.

Note
At plum of cooling liquid from a radiator practically all liquid from a broad tank will also merge.

2. Weaken an inhaling of a collar of fastening of a steam discharge hose of a radiator of a heater and remove a hose from the union of a broad tank.
3. Similarly remove a steam discharge hose of a radiator of the cooling system from the union of a broad tank.
4. Weaken an inhaling of a collar of a filling hose...
5.... also disconnect a filling hose.
6. Moving a tank up and at the same time bringing its rear edge out of dredging of facing of a motor board, remove it from the car.
7. Merge the remains of cooling liquid from a tank.
8. Install a broad tank as it should be, the return to removal.
9. Fill the cooling system with liquid (see. "Replacement of cooling liquid"). Wrap a stopper of a broad tank, launch the engine, check lack of leak of cooling liquid through connections of hoses of a tank and warm up the engine idling up to the working temperature to remove air traffic jams from system.