5.19.2. Replacement of pillows of a suspension bracket of system of production of the fulfilled gases

Rubber pillows of a suspension bracket of final system replace if because of their damage or excessive deformation elements of system begin to knock, adjoining to a body or to other units of the car.
The additional muffler and forward part of the main muffler are suspended on three identical pillows …
… and a back part of the main muffler — on one pillow of an original form.
1. For replacement of a back pillow of a suspension bracket of the main muffler bring its arm out of a back pillow …
2. … also lower the muffler.
3. Take out a pillow from an arm on a body by means of the screw-driver.
4. Establish a new pillow as it should be, the return to removal. For simplification of installation of a back pillow grease a muffler arm with soap solution.
5. For replacement of a forward pillow of a suspension bracket of the main muffler, having raised the muffler and having hooked the screw-driver …
6. … bring a muffler arm out of a pillow.
7. In the similar way by means of the screw-driver …
8. … remove a pillow from an arm on a body.
9. Establish a new pillow as it should be, the return to removal.

Note
Pillows of a suspension bracket of the additional muffler change to similarly forward pillow of a suspension bracket of the main muffler.