5.19.4. Replacement of the additional muffler

1. Separate hinged connection of pipes of additional and main mufflers (see. "Replacement of the main muffler").
2. Unbend a short mustache of 1 lock plate and two lock short moustaches 2 thermoscreens of a katkollektor.
3. Turn off three nuts of fastening of a flange of a reception pipe of the additional muffler to a katkollektor flange, remove a lock plate …
4. … and thermoscreen.
5. Having raised the additional muffler, bring its arm out of a forward pillow of a suspension bracket.
6. Remove a flange of a reception pipe of the additional muffler from hairpins of a katkollektor and take sealing laying.

Good advice
Replace sealing laying of a flange of a reception pipe of the additional muffler at each dismantling of connection new.

7. Supporting the additional muffler, bring its arm out of a back pillow of a suspension bracket similar to removal of an arm from a forward pillow of a suspension bracket (see item 5) …
8. … also remove the additional muffler.
9. Install the additional muffler and all removed details as it should be, the return to removal. Do not forget to stop nuts of fastening of a flange of a reception pipe of the muffler, having unbent on them short moustaches of a lock plate and the thermoscreen.