8.3.1. Removal and installation of a steering wheel

It will be required to you: a face key (head) "on 24", the screw-driver with a flat edge, a six-sided key "on 5".
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Establish a steering wheel in the situation corresponding to the rectilinear movement of the car.
3. Turn out two screws of fastening of a safety cushion …
4. … turn a pillow …
5. … having hooked a green clamp of a block of managing directors of wires …
6. … take a clamp aside …
7. … and, having disconnected a block of wires, remove a safety cushion.
8. Wring out a clamp of a block of a plait of wires …
9. … also disconnect a block of wires of sound signals.
10. Mark with a color marker an arrangement of a steering wheel concerning a steering shaft.
11. Weaken an inhaling (without turning off completely) nuts of fastening of a steering wheel on a shaft …
12. … sharp blows of hands bring down a steering wheel from a shaft …
13. … and, having finally turned off a fastening nut, remove a steering wheel from the car.
14. Establish a steering wheel upside-down, observing an arrangement of tags on a steering wheel concerning a shaft.