8.4.2. Removal and installation of an internal tip of steering draft

It will be required to you: the screw-driver with a flat edge, keys "on 13", "on 15".
1. Remove an external tip of steering draft (see. "Removal and installation of an external tip of steering draft and replacement of a protective cover of the spherical hinge").
2. Hook a lock plate …
3. … also remove it from heads of bolts of drafts of a steering trapeze.
4. Weaken an inhaling of both bolts of drafts of a steering trapeze …
5. … turn out a bolt of the removed draft …
6. … take away an internal tip, having turned a connecting plate …
7. … also remove draft through an opening in a mudguard of a wheel arch.
8. The worn-out or damaged rubber-metal hinges of internal tips of drafts can be the cause of the increased free wheeling of a steering wheel. As operation on replacement of the hinge demands skill and the special tool, we recommend to replace the hinge assembled with an internal tip of draft, having removed a tip from adjusting draft.
9. If you replace only draft tips, turn out bolts of their fastening and curtail tips from adjusting draft.
10. Before installation of steering draft check the following: distance and from an end face of a hexagon of adjusting draft to an end face of an external tip (it has to be 10,6–16,3 mm) and b distance to an end face of an internal tip (10,8–14,2 mm). It is necessary to sustain these sizes of carving sites for reliable connection of draft with tips.
11. Establish draft as it should be, the return to removal.
12. After installation of drafts check and if necessary adjust the angles of installation of wheels (see. "Check and adjustment of angles of installation of forward wheels").