8.5.2. Check of a gap between an emphasis of a lath and a nut of an emphasis

1. Remove the steering mechanism from the car (see. "Removal and installation of the steering mechanism").
2. Establish a lath in average situation which is defined by the size (87±0,25) mm from a gear wheel axis to a lath end face. By means of special adaptation load a lath with a force of P = (500±20) N, or (51±2) kgfs, at distance of 84 mm from a gear wheel axis in the direction to a lath emphasis.
3. The most admissible gap between an emphasis and a nut makes 0,2 mm. The most admissible movement of the X lath measured through relative movement of a press punch 1 should not exceed 0,16 mm.