9.10.2. Replacement of brake hoses of back brake mechanisms

It will be required to you: a special key "on 10" for an otvorachivaniye of nuts of brake tubes, a key "on 15".
1. Install the car on the elevator or an osmotrovy ditch.
2. A key "on 10" turn off the brake tube going from the regulator of brake forces from a hose, holding a key "on 15" a hose tip.
3. Take out a hose tip from an arm on a body.
4. A key "on 10" turn off the brake tube going to the brake mechanism of a back wheel from a hose, holding a key "on 15" a hose tip.
5. Take out a hose tip from an arm on a beam of a back suspension bracket and remove a brake hose.
6. Establish a new hose as it should be, the return to removal. You watch that it was not overwound.
7. Pump over a hydraulic actuator of the brake system (see. "Pumping of a hydraulic actuator of the brake system").