9.11.2. Repair of the lever of the parking brake

It will be required to you: two keys "on 13", a face key (head) "on 13", the screw-driver with a crosswise edge, passatizh.
1. Disconnect a wire from the minus plug of the rechargeable battery.
2. Remove facing of a tunnel of a floor (see. "Removal and installation of facings of a tunnel of a floor").
3. From below the car a key "on 13" turn off a lock-nut and an adjusting nut of the parking brake and remove the equalizer 1 from draft 2.
4. Take out a protective cover from an opening in a floor and remove it from draft.
5. From within salon turn out the screw of forward fastening of an arm of the switch of a control lamp of turning on of the parking brake. Pay attention that the screw fixed a wire of "mass" of the switch.
6. A key "on 10" turn out four bolts of fastening of the lever of the parking brake (two lobbies from them fix also a switch arm).
7. Put an arm with the switch aside.
8. Remove the lever of the parking brake, having brought draft out of an opening in a floor.
9. For replacement of draft take out the forelock 1 and remove a washer 2.
10. Remove draft from an axis.
11. Replace the worn-out or burst plastic plug. Collect and install the lever of the parking brake as it should be, the return to dismantling. After installation of the lever adjust the parking brake (see. "Check and adjustment of the drive of the parking brake").